Epoxy Floor Coat primer, specially developed for your garage floor or workshop floor.

The 2K primer for epoxy resin systems is used as a primer for our colored 2K floor coating systems.
It is ideal as a bonding bridge on all mineral floors.
A primer ensures that the substrate to be sealed is completely sealed so that thinner-layer epoxy resin systems can follow.
It reduces the curing time of subsequent paint applications, as they do not first have to penetrate absorbent materials such as wood or concrete pores.
It can seal screed, cover concrete paint, pave the way for a floor coating in living areas or fill absorbent substrates to make them available for further processing.
The floor coating can be applied to concrete, screed and wood.

Can be colored with our >>Pigment Pastes<< or >>Color Chips<<

Consumption 6 kg = approx. 30m² (3 kg resin + 3 kg hardener)

For floors smaller than 20m² we recommend 2 thin layers of primer, 3 kg per layer, as the optimal bonding bridge. For floors larger than 20m² we recommend one layer.

Here you can find the step-by-step instructions: >>click here<<

Please note:
The consumption information refers to an optimally prepared soil.
Holes, cracks or damage in the floor lead to higher consumption.

Product features:
• Two-component system (2K)
• Deep primer and bonding bridge
• solvent resistant
• particularly suitable for concrete and screed
• impact- and abrasion-resistant surface
• good moisture and condensation resistance
• easy to clean, binds dust
• easy application using a roller
• highly resilient, resistant to chemicals and weather
• solvent-free and environmentally friendly
• for indoor and outdoor use

2K floor coating epoxy resin primer

Name: 2K floor coating epoxy resin primer
Brand: Epoxy-giethars.nl
Rating: 5 (1 reviews)

€85.95

€81.66

Sales Tax Included |

5% Korting

Weight:

Quantity

Safety instructions:

Reaction product:

Reaction products with ammonia

Bisphenol-A-(epichlorohydrin; formaldehyde, polymer with (chloromethyl)oxirane and phenol.

Includes:

Propylidyne trimethanol, propylated, C13/C15 alkyl glycidyl ether; reaction product.

Danger:
H315 Causes skin irritation.

H317 can cause allergic reactions to your skin.

H319 Causes serious eye irritation.

H302+H312 Harmful if swallowed or in contact with skin.

H318 Causes serious eye damage.

H411 Toxic to aquatic life with long lasting effects.

Danger:

P102 Keep out of reach of children.

P270 Do not eat, drink or smoke when using.

P301+P310 IF SWALLOWED:IMMEDIATELY GO TO POISON CENTER/
Call doctor/

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove any contact lenses. Continue rinsing.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash skin with water/shower.

P501 Contents/container in accordance with local/regional/national/
Dispose of under international regulations.

EUH205 Contains epoxy-containing compounds. Can cause allergic reactions.

P271 Use only outdoors or in well-ventilated areas,

Avoid the release of P273 into the environment.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301+P330+P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Suitable for use from approx. 10°C

Walkable after approx. 8-10 hours, depending on the temperature.

Recoatable after approx. 10-12 hours

Mechanically loadable after approx. 5-7 days, at 20°C

Complete (chemical) curing after approx. 5-7 days

Mixing ratio: 2:1, resin/hardener

Processing time with a short-pile paint roller at 20°C approx. 20 minutes

Consumption approx. 150-300 g/m² per layer, depending on pore depth and roll thickness

Color: Brown
If you see that the resin component is white and flaky, then this is crystallized resin.

Crystallization of epoxy resin is a physical process caused by external factors such as cold or temperature fluctuations. It is fully reversible and is comparable to the freezing of water. The main causes are

1. Temperatures that are too low: crystals can form at temperatures below 15 °C during storage or transport.

2. Temperature fluctuations: The formation of crystals is driven by regular alternation between hot and cold.
High resin purity: Epoxy resin with high purity is more susceptible to crystallization.

3. Low viscosity: Resins with low viscosity tend to form crystals.

This reaction occurs at extremely low temperatures and can be reversed by a water bath (approximately 60 minutes/50 °C).

Simply place the sealed resin container in the water bath. Then allow the resin to cool to normal room temperature.

Reviews

Rated 5 out of 5 stars.

5.0 | 1 review

1 review

MarcoApr 07
Rated 5 out of 5 stars.
Super primer.
Met 1 woord een top product
Was this helpful?

Free shipping in the Netherlands from €50

Create your own artwork – with epoxy resin of the highest quality

Our epoxy resins stand for outstanding quality, safety, and precision – tested according to the strictest standards.

No cheap imports, but high-quality, carefully tested products you can fully trust.

Whether it concerns floor coating, wood finishing, coasters, electronic applications, boat building, model making, or restorations – with our resin, you realize every project professionally and durably.

Take matters into your own hands and create lasting, stunning results – exactly according to your style and expectations.

Laptop on wooden desk, high-gloss epoxy laminate resin

High quality – visible in every result

Our resins, pigments, and accessories are tested according to strict standards and guarantee consistent, excellent results.
We stand for top quality: BPA- and solvent-free epoxy resin for crystal-clear, transparent, and bubble-free castings – perfect for both professional applications and creative projects.